Danfoss ICAD 600

2 DKRCI.PI.HV0.A2.02 / 520H0546 © Danfoss A/S (RC-CMS/MWA), 11-2005
Terminal box
Control cable
Supply cable
ICAD
ICAD
Terminal box
ICAD 600/900 - Analog I/O for modulating control
Fig. 6
Fig. 7
Fig. 8
ReferenceColorDescription
AWhite–Common Alarm
BBrown–ICM fully open
CGreen–ICM fully closed
DYellow–GND ground
EGrey+0/4 - 20 mA Input
FPink+0/2 - 10 V Input
GBlue+0/4 - 20 mA Output
IWhite+
Fail safe supply
Battery / UPS* 19 V d.c.
IIBrown+
Supply voltage
24 V d.c.
IIIGreen–
}
}
Digital
Ouput
Analog
In/Output
ICAD
Terminal box
ICAD 600/900 - Digital I/O for ON/OFF valve operation
ICAD 600/900
* Uninterruptible Power Supply
Only possible
with EKC 347
Auxiliary relays