Danfoss ICAD 1200A

24 Volt d.c.
ONLY
Quick Start Guide
ICAD 600/900/1200
Ref. Colour Description
A Black – Common Alarm
B Brown – ICM fully open
C Red – ICM fully closed
D Orange – GND ground
E Yellow + 0/4 - 20 mA Input
F Green +
0/2-10V input or digital
input for on/off control
G Blue + 0/4 - 20 mA Output
I Black +
Fail safe supply
Battery / UPS* 19 V d.c.
II White +
Supply voltage
24 V d.c.
III Brown –
Digital
Ouput
*
Uninterruptable Power Supply
Terminal box -
not supplied
by Danfoss
1 2
3
24 Volt d.c.
ONLY
© Danfoss A/S (AC-SMC/MWA), 05 - 2011 DKRCI.PI.HV0.J2.02 / 520H4887 / 027R9801 1
Before you
start using ICAD:
Tighten CW
Quick Start Guide
Oil

Danfoss ICAD 1200A Specifications

General

Brand	Danfoss
Model	ICAD 1200A
Category	Controller
Language	English

Summary

ICAD Unit Overview and Connections

Digital Output and Input Signal Definitions

Details of digital output signals and input signal types for ICAD.

Programming the ICAD Unit

Valve Size Setup Procedure

Mandatory guide for setting the correct valve size for the ICAD unit.

Analogue Input Signal Configuration

Optional guide for changing the analogue input signal type.

Factory Reset of ICAD

Procedure for performing a factory reset on the ICAD unit.