Danfoss ICAD 600

© Danfoss A/S (RC-CMS/MWA), 11-2005 DKRCI.PI.HV0.A2.02 / 520H0546 1
027R9778 027R9778
Fig. 1
Fig. 2
Fig. 3
Fig. 4
ICAD 600
ICAD 900
ICAD 600
ICAD 900
Fig. 5a, ICM + ICAD 600
Fig. 5b, ICM + ICAD 900
mmin.
H451.77
L
3
251
NmLB-feet
32.5
2.5 mm
Instruction
Actuator ICAD 600 / ICAD 900

Danfoss ICAD 600 Specifications

General

Brand	Danfoss
Model	ICAD 600
Category	Controller
Language	English

Summary

Installation Guide

Electrical Data and Installation

Details electrical specifications, supply voltage, load, and wiring procedures for ICAD 600/900 actuators.

Mechanical Installation and Startup

Covers mounting the ICAD actuator on ICM valves and initial startup procedures, including display indications.

ICAD General Operation

MMI Controls and Display Functions

Explains the Man Machine Interface (MMI) controls (push buttons) and display indications for operation and parameter access.

ICAD Alarm System

Details the various alarms ICAD can handle, their descriptions, causes, and priorities.

Parameter and Service Lists

Parameter List Overview

Lists configurable parameters for ICM OD, main switch, mode, analog input/output, fail safe, and ICM configuration.

Service Parameters

Provides parameters related to OD, analog/digital signals, and software versions for service purposes.

Factory Reset Procedure

Outlines the steps required to reset the ICAD unit to its factory default settings.