8
4. Codes de dérangement
E0 = Défectuosité interne; remplacez le
thermostat
E1 = Capteur interne court-circuité ou
déconnecté; remplacez le
thermostat
E2 = Capteur externe court-circuité ou
déconnecté
5. Fiche technique
Source d’alimentation 120/240 V
c.a.50/60 Hz
Charge 16A maximum
(charge résistive)
Puissance 1.920 W à 120 V c.a.
3.840 W à 240 V c.a.
GFCI: Classe A
(seuil e déclenche-
ment réglé à 5 mA)
Plage de témperature +5 à +40°C,
+40 to +104˚F
Plage de témperature ambiante:
Thermostat: de 0 à +40°C,
+32 à +104˚F
GFCI: -35 à +65°C,
-31 à +149˚F
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to
products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
DK-6430 Nordborg
Denmark
Tel.: +45 74 88 22 22
Telefax: +45 74 49 09 49
E-mail: danfoss@danfoss.com
To Previous Page
Loading...
Need help?
General
