Danfoss MCD 600 User Manual

4.5 Trip Codes
Code Description
0 No trip
1 Excess start time
2 Motor overload
3 Motor thermistor
4 Current imbalance
5 Frequency
6 Phase sequence
7 Instantaneous overcurrent
8 Power loss
9 Undercurrent
10 Heatsink overtemperature
11 Motor connection
12 Input A trip
13 FLC too high
14 Unsupported option (function not available in inside delta)
15 Communications card fault
16 Forced network trip
17 Internal fault
18 Overvoltage
19 Undervoltage
23 Parameter out of range
24 Input B trip
26 L1 phase loss
27 L2 phase loss
28 L3 phase loss
29 L1-T1 shorted
30 L2-T2 shorted
31 L3-T3 shorted
33 Time-overcurrent (bypass overload)
Data Structures
Installation Guide | PROFIBUS Card
AQ277154583779en-000101 / 175R1181
14 | Danfoss A/S © 2018.09

Danfoss MCD 600 Specifications

General

Frequency	50/60 Hz
Voltage Range	208 – 690 VAC
Protection Class	IP20
Communication Protocols	Modbus RTU, Profibus, Ethernet/IP
Rated Operational Voltage	200-690 V
Mounting	Wall Mounting
Storage Temperature	-25°C to 70°C
Relative Humidity	5 - 95% non-condensing
Input Voltage Range	200-690 V