Danfoss MCD3000 Series User Manual

MCD3000 Series
4 MG.15.B2.02 – VLT is a registered Danfoss trademark
Spare Parts
■ Spare Parts
Main Control Module
Part Number
MCD3007 MCD3015 MCD3018 MCD3022 MCD3030 MCD3037 MCD3045 MCD3055 MCD3075 MCD3090 MCD3110 MCD3132 MCD3185 MCD3220 MCD3300 MCD3315 MCD3400 MCD3500 MCD3600 MCD3700 MCD3800
(number per unit)
175G5088 (0DCC1 / 991-00448-00) 1 1 1 1 1 1 1 1
175G5089 (0DCC2 / 991-00453-00) 1 1 1 1 1 1 1 1 1 1 1 1 1
175G5088 (0DCC1 / 991-00448-00)
175G5089 (0DCC2 / 991-00453-00)
Identifying Main Control Modules
The two Main Control Module types can be identified by the PCB
number. This number is etched on the actual printed circuit board.
Turn the Main Control Module over so you are looking at the printed
circuit board. The number is etched on the board in the upper left
region. (The characters either side are not relevant).
Part Number PCB No.
175G5088 x1325x
175G5089 x1326x

Danfoss MCD3000 Series Specifications

General

Brand	Danfoss
Model	MCD3000 Series
Category	Controller
Language	English