Danfoss OPTYMA Control AK-RC 101 - General Information; Product Description; Main Characteristics

OPTYMA
TM
Control single-phase AK-RC 101 RS8FD402 © Danfoss A/S 2014/11 3
Description
The OPTYMA
TM
Control single-phase is a new control
panel for cold rooms with a single-phase compressor
up to 2 HP, specially designed for safety, protection,
control and ease of installation.
It allows the user to control all the components on
a refrigeration system: compressor, evaporator fans,
defrosting elements, room light and thermostat-
holder.
Applications
- Complete management of single-phase static
or ventilated refrigeration systems up to 2 HP, with
o-cycle or electrical defrosting and with direct or
pump-down compressor stop.
- Control of single-phase evaporator unit only with
solenoid valve or remote condensing unit.
Main characteristics
- Direct control of defrosting elements, evaporator
fans, room light with outputs directly connectable
to the various units.
- Automatic fuse protect the refrigeration unit.
- Stylish ABS housing with transparent cover for
access to the automatic fuse, all with an IP65
protection rating so that panel can be used
outside the room.
- LED indicators and large display show system
status.
- User-friendly keypad.
- Display resolution to 0.1 °C.
- Modbus data communication that can be
connected to an ADAP-KOOL® system unit.
Overall dimensions
Dimensions in mm.
General