Danfoss ECL COMFORT - User Manual

C47
C47
VI.7C.Q2.02 2005.09
VI.7C.Q2.02 2005.09
www.danfoss.com
User's Guide 
Installer's Guide 
www.danfoss.com
ECL Comfort
Installer's Guide
ECL Comfort
User's Guide
*087R8073*
*VI7CQ202*
*087R8073*
*VI7CQ202*
Mixing and DHW controller

Danfoss ECL COMFORT Specifications

General

Type	Electronic controller
Display	LCD with backlight
Protection Class	IP 41
Communication	Modbus
Mounting	Wall mount
Application	Heating, cooling
Relative Humidity	10% to 90% (non-condensing)
Display Features	Graphical

Summary

ECL Comfort Installers Guide

ECL Comfort Users Guide

Guide for daily operation and user settings of the ECL Comfort controller.

Installation

10 a Identifying the system type

Guide to identifying different system types compatible with the ECL Comfort controller.

Mounting the ECL Comfort controller

Mounting on a wall

Details for mounting the controller onto a wall surface.

Mounting on a DIN rail

Steps for mounting the controller onto a DIN rail.

Mounting in a panel

Connecting and placing the temperature sensors

Inserting the ECL Card

Basic Set-up

Basic set-up

Monitoring temperatures and system units - line B

Setting the heat curve (circuit I), storage temperature (circuit II) - line C

How to set heat curves and storage temperatures.

Room temperature influence - line 3

Control parameters - lines 4-7

Configuring proportional band, integration time, and valve running time.

Cut-in and cut-out temperature at DHW charging - lines 1-2, circuit II

Control & overviews

ECL Card settings (circuit I)

Service parameters (10-199)

Detailed service parameters for heating circuit I.

Extended Service

Adjusting the service parameters