Danfoss ECL COMFORT - Control & overviews; Service parameters (10-199)

The grey
side of the
ECL Card
Basic set-up
Min. flow
temp.
0
1
1
ON
2
094
2
3
ON
2
ON
Max. flow
temp.
Setting range
2 Flow temperature limits, min. and max.
Circuit Setting range Factory setting
I / (II) 10 ... 150 °C min. 10 / (10), max. 90 / (90) °C
The mentioned setting range and factory settings may vary from
the settings on your ECL Card.
The left end of the setting range blinks. Adjust the
min. limit of your system temperature.
Choose the max. limit. The right end of the setting
range blinks.
Adjust the max. limit.
Flow temperature limits -
line 2
22