Danfoss ECL COMFORT - Copy Personal Settings to Additional Controller in Identical Systems

The yellow
side of the
ECL Card
Miscellaneous
Copy personal settings to additional controller(s) in
identical systems
Ensure that the other controller(s) use(s) the same ECL Card
type. (If this is not the case, please read section 15).
Insert the ECL Card, which contains the personal settings,
with the yellow side facing you.
Go to line 9 (is not displayed), which is the second
line below line 7
Select the copying direction (from the card to the
controller).
Copying direction
C
C 99
Y
0
P
Copy.
Do not remove the ECL Card while copying. The data on the ECL
Card can be damaged!
34b