3
Please note
This product should only be installed by a suitably quali ed
electrician or heating installer. The installation must comply
with local Building Regulations and Wiring Regulations,
including any competent person requirements that may exist.
Installation Instructions
Installation Instructions
Thermostat features
Temperature Range 10-30°C
Manual Fan Speed Selector Yes
Fan Output 3 (1) A, 10-230Vac, Type 1B
Thermostat Heat, O , Cool
Selector
Yes
Power Supply 24 Vac ± 15%, 50/60Hz
Control Method P+I, 2k Proportional Band
Dimensions (mm) 110 wide x 90 high x 40 high
Design Standard EN60730-2-9
Rated Impulse Voltage 2.5Kv
Ball Hardness Test 75°C
Control Pollution Situation Degree 2
Temperature Accuracy ±1°C
Control Output 0-10 Vdc
Common Supply 10 - 230 Vac
Speci cation
GB
To Next Page
Loading...
