AN384648824392en-010102 © Danfoss | Energy Meters | 2021.10 | 13
Installation guide SonoMeter 40
5. Disposal
This symbol on the product indicates that it may not be disposed of as household
waste.
It must be handed over to the applicable take-back scheme for the recycling of
electrical and electronic equipment.
• Dispose of the product through channels provided for this purpose.
• Comply with all local and currently applicable laws and regulations.
Item Material Disposal
Battery
AA-cell lithium/thionyl chloride 700 mg
lithium
Approved deposit for lithium
batteries
PCBA with display
Coppered epoxy laminate components
soldered on, PC, TPE
Electronic waste
Cables Copper with PUR or PVC jackets Cable recovery
Flow sensor (incl. trans-
ducer and liner)
Brass, stainless steel, PPS Metal recovery
Transducer PZT, stainless steel, PEI Approved deposit for PZT
Other plastic parts PC, PPS, PEI, TPE Plastic recovery
6. Local Importer name and address
For goods delivered to UK, importer name and address is:
Danfoss Ltd.
22 Wycombe End
HP9 1NB
GB
To Next Page
Loading...
