Need help?Do you have a question about the Danfoss MAGFLO MAG 3100 and is the answer not in the manual?
General| Type | Electromagnetic flow meter |
|---|---|
| Repeatability | ±0.1% of measured value |
| Protection Class | IP67, IP68 |
| Measurement Principle | Faraday's law of electromagnetic induction |
| Flow Rate Range | 0.1 m/s to 10 m/s |
| Material | Stainless steel, carbon steel |
| Lining Material | PTFE |
| Electrode Material | Stainless steel, Hastelloy, Titanium, Tantalum |
| Accuracy | ±0.2% of measured value |
| Fluid Temperature | -20°C to +180°C (depending on lining material) |
| Process Connection | Flange |
| Approvals | ATEX, IECEx, FM |
| Outputs | 4-20 mA, pulse, frequency |
| Communication | HART |
| Power Supply | 24 V DC |
| Ambient Temperature Range | -20°C to +60°C |
Guidance on selecting the correct sensor based on sizing tables, conductivity, liner, and electrode material.
Recommendations for installation, grounding, and specific guidelines for Ex hazardous area installations.
Methods for sensor installation, potential equalization (grounding), and specific protection considerations.
Wiring diagrams for signal converters and sensors in various configurations, including safety barriers and cleaning units.
Guide to keypad functions, display layout, menu structure, password access, and operator menu setup.
Checklists and tables for troubleshooting converter and sensor malfunctions, including error lists.
To Next Page