MAGFLO
Specifications
6
2. Specifications MAG 1100 and MAG 1100 Ex
Type Flangeless sensor (Wafer)
Nominal size
1
/
4
",
3
/
8
",
1
/
2
", 1", 1
1
/
2
", 2", 3", 4"
3
/
8
",
1
/
2
", 1", 1
1
/
2
", 2", 3", 4"
1
/
4
",
3
/
8
",
1
/
2
", 1", 1
1
/
2
", 2", 3", 4"
Operating pressure
1
/
4
"-2
1
/
2
": 600 psi, 3": 560 psi,
1
/
4
"-2
1
/
2
": 600 psi, 3": 560 psi,
4": 450 psi 300 psi 4": 450 psi
Vacuum
1.5 × 10
-5
psi 0.3 psi 1.5 × 10
-5
psi
Temperature of
PFA
−20°F to +265°F
medium
Ceramic
0°F to +300°F −5°F to +250°F
High temperature version
0°F to +400°F Suitable for steam sterilization at 300°F
Temperature shock (Duration > 1 min.): Max. ±210°F momentarily (Duration > 1 min.):
(Ceramic liner)
1
/
4
",
3
/
8
",
1
/
2
", 1":
1
/
4
",
3
/
8
",
1
/
2
", 1":
Max. ∆T ≤ 60°F/min. Max. ∆T ≤ 60°F/min.
1
1
/
2
", 2", 2
1
/
2
": Max. ∆T ≤ 50°F/min. 1
1
/
2
", 2", 2
1
/
2
" : Max. ∆T ≤ 50°F/min.
3", 4" : Max. ∆T ≤ 40°F/min. 3", 4" : Max. ∆T ≤ 40°F/min.
(Duration ≤ 1 min., (Duration ≤ 1 min.,
followed by 10 min. rest): followed by 10 min. rest):
1
/
4
",
3
/
8
",
1
/
2
", 1": Max. ∆T ≤ 175°F
1
/
4
",
3
/
8
",
1
/
2
", 1": Max. ∆T ≤ 175°F
1
1
/
2
", 2", 2
1
/
2
": Max. ∆T ≤ 160°F 1
1
/
2
", 2", 2
1
/
2
": Max. ∆T ≤ 160°F
3", 4": Max. ∆T ≤ 140°F 3", 4": Max. ∆T ≤ 140°F
Ambient temperature Remote mount signal converter: −40°F to +210°F
Integral mount signal converter: −5°F to +120°F
Liner Aluminum oxide Al
2
O
3
(ceramics) Reinforced PFA (Teflon) Aluminum oxide Al
2
O
3
(ceramics)
Electrodes Platinum with gold/titanium brazing Hastelloy C-276 Platinum with gold/titanium brazing
alloy alloy
Enclosure Stainless steel AISI 316L (1.4404) Stainless steel AISI 316 (1.4436) Stainless steel AISI 316L (1.4404)
Stainless steel AISI 316 (1.4436)
Terminal box
Standard
Fiberglass-reinforced polyamide Fiberglass-reinforced polyamide Stainless steel AISI 316L (1.4404)
(Remote installation only)
High temp.
Stainless steel AISI 316 (1.4436) Stainless steel AISI 316L (1.4404)
Studs & nuts Stainless steel AISI 304 (1.4301) Stainless steel AISI 304 (1.4301)
Number and size to DIN 2501 Number and size to DIN 2501
Mating flanges DIN 2501 (150-600 psi), ANSI B16.5,
class 150 and 300 or equivalent
To DIN 2501 (150-600 psi),
ANSI B16.5,
class 150 and 300 or equivalent
Option
1/4'' & 3/8'': 1/2'' NPT threaded adaptor
Gaskets
Standard
EPDM (max. 300°F, 600 psi) EPDM (max. 300°F, 600 psi)
Option
Graphite (max. 390°F, 600 psi) Graphite (max. 390°F, 600 psi)
Option
PTFE (max. 210°F, 300 psi) PTFE (max. 265°F, 300 psi)
Cable entries 4 pcs. PG 13.5
Enclosure rating
Standard
NEMA 4X / 6 (3 ft. submersion for 30 min)
Option
NEMA 6P (30 ft. continuous submersion)
Mechanical load (vibration) 18-1000 Hz random, 3.17 G rms in all directions to EN 60068-2-36 18-1000 Hz random in all directions
to EN 60068-2-36
Sensor: 3.17 G/
Integral mount Ex-d: 1.14 G
Test pressure 1200 psi (2 × nominal) 600 psi (2 × nominal) 1200 psi (2 × nominal)
Ex approvals EEx [ia/ib] IIB T4-T6/
DEMKO, No. 97D.121909X
Excitation frequency
1
/
4
" - 2
1
/
2
": 15 Hz
3
/
8
" - 2
1
/
2
": 15 Hz
1
/
4
" - 2
1
/
2
": 15 Hz
programmable 3", 4": 7.5 Hz 3", 4": 7.5 Hz 3", 4": 7.5 Hz
2. Specifications
2.1 Sensor MAG 1100 and MAG 1100 Ex
MAG 1100 Ceramic MAG 1100 PFA
MAG 1100 Ex
To Next Page
Loading...
Need help?
General
