EasyManua.ls Logo

Danfoss SonoMeter 40 - Page 3

Danfoss SonoMeter 40
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AN384648824392en-010102 © Danfoss | Energy Meters | 2021.10 | 3
Date:
2021.09.22
Issued by Date:
2021.09.22
Approved by
Place of issue:
8811 Scheifling
Austria
Signature:
Name: Norbert Spreitzer
Title: Product Portfolio Manager
Place of issue:
1210 Ljubljana,
Slovenia
Signature:
Name: Gasper Benedik
Title: Energy Meters Director
Danfoss only vouches for the correctness of the English version of this declaration. In the event of the declaration being translated into any other
language, the translator concerned shall be liable for the correctness of the translation
ID No: 014R2944
This doc. is managed by 500B0577
Revision No: 01
Page
2
of
2
UK DECLARATION OF CONFORMITY
Danfoss A/S
Danfoss Energy Metering
6430 Nordborg, Denmark | CVR nr.: 20 16 57 15 | Telephone: +45 7488 2222 | Fax: +45 7449 0949
declares under our sole responsibility that the
Product category: Energy Meters Type designation(s): SonoMeter 40
Covered by this declaration is in conformity with the following directive(s), regulation(s), standard(s) or other
normative document(s), provided that the product
is used in accordance with our instructions.
Radio Equipment Regulations 2017
2
Article 3.1a (LVD)
BS EN 61010-1:2010+A1:2019
BS EN 62368-1:2014
BS EN 62311:2008
Article 3.1b (EMC)
EN 301 489-3 V2.1.1
EN 301 489-1 V1.9.2
Article 3.2 (Radio)
EN 300 220-1 V3.1.1
EN 300 220-2 V3.1.1
Electromagnetic Compatibility Regulations 2016
1
BS EN 55032:2015+A11:2020
Electrical Equipment (Safety) Regulations 2016
1, 3
BS EN 61010-1:2010+A1:2019
BS EN 62368-1:2014
BS EN 62311:2008
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(as amended)
BS EN IEC 63000:2018
Heat Metering and Billing Regulations 2014
Heat meter accuracy cl. 7.9:
Notiied Body: Lithuanian Energy Institute, 1621, performed type approval and issued certiicate LT-1621-MI004-047.
1 For variants with Radio Module the declaration for EMC & LVD shall be ignored
2 For variants without Radio Module the declaration for RED shall be ignored.
3 For variants without Radio Module and without Mains power supply (24V AC/DC) the declaration for RED and LVD shal
l be ignored.
Installation guide SonoMeter 40

Related product manuals