Danfoss TP4000 Installation Instructions

3
Installation Instructions
Product Specifi cation
Please Note:
This product should only be installed by a qualifi ed
electrician or competent heating installer and should
be in accordance with the current edition of the IEEE
wiring regulations.
Thermostat features TP4000
Power supply 2 x AA/MN1500/LR alkaline cells
Memory back-up 1 min for battery change
Switching action of output relay
1 x SPDT, Type 1B
Switch rating of relay contact 3(1)A, 10-230Vac
Temperature range Off , 5-30°C
Dimensions, mm 110 wide, 88 high, 28 deep
Design standard EN60730-2-9
Rated impulse voltage 2.5kV
Ball hardness test 75°C
Control pollution situation Degree 2
Temperature accuracy ±1°C
Time accuracy ±1 min.
Installation Instructions
GB

Danfoss TP4000 Specifications

General

Display	LCD
Temperature Range	5°C to 30°C
Power Supply	2 x AA batteries
Control Mode	On/Off
Mounting	Wall-mounted
Protection Class	IP30
Type	Room Thermostat
Accuracy	±0.5°C