9
· Press Λ or V until required temperature is
displayed.
(This override will automatically cancel at beginning
of next programmed event).
To temporarily alter the current programmed temperature
GB
User Instructions
Frost Protection and Thermostat Mode
A constant temperature between 5°C-30°C can be
selected if desired, for example, for frost protection.
· Press Λ and V together.
· Use Λ or V buttons to set the desired low
temperature.
- At 5°C a snowfl ake symbol appears
indicating frost protection mode.
- At all other temperatures the snowfl ake
symbol is turned off .
· To return to automatic programming press Λ
and V together again.
To Next Page
Loading...
