11
Setting the correct Time and Day
Before you start
This will reinstate the preset
programmes and sets the time to
12.00pm on Monday (MO)
Press and hold DAY & NEXT
ON/OFF for 1.5 seconds to toggle
between 24hr clock and AM/PM
display, as required.
SETTING THE TIME
Press PROG once.
The words SET TIME will appear
at the top of the display & the time
will fl ash on and off.
Use the + and - buttons to set
the correct time (press and hold to
change in 10 min increments).
Choice of 24hr or AM/PM display
RESET, 24hr or AM/PM display, Setting Time
Open the fl ap on the front of the clock. Press the RESET
button using a non-metallic object (e.g. pencil/matchstick)
until you hear a click and the red light on the front of the
unit fl ashes once.
To Next Page
Loading...
