13
!
Before you change the preset programmes
Your installer will have set your unit to operate in one of the
following modes:
● 5/2 day - one set of programmes for weekdays and
another for weekends (page 14-15)
● 7 day - different settings for each day of the week
(page 16-17)
● 24 hour - one set of programmes for the whole week
(page 18)
See INSTALLER SETTING tick box
on inside fl ap label to ascertain which
mode your unit is set .
Changing Preset Programmes
Please Note
The unit must be programmed in sequence and ON/
OFF times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press
NEXT to move on to the next setting
Your installer will have set your unit to programme
either 2 or 3 ON/OFFs per day. If your clock has been
installed to allow 3 ON/OFFs and you do not wish to
use one of the ON/OFF settings, simply programme
the ON time to be the same as the OFF time and the
setting will not operate.
If at any time you get confused and need to reset
your timings to the standard programme, press the
RESET button to return to the preset programmes.
!
INSTALLER SETTING
24 Hour
5+2 Day
7 Day
To Next Page
Loading...
