Danfoss VLT 2800 Series General Information

1.
In parameter 107 Automatic motor tuning, se-
lect data value [2]. "107" will now flash, and
"2" will not flash.
2. AMT is activated by pressing start. "107" will
now flash and dashes will move from left to
right in the data value field.
3. When "107" appears once more with the data
value [0], AMT is complete. Press [STOP/
RESET] to save the motor data.
4. "107" will then continue to flash with the data
value [0]. You can now proceed.
NOTE
VLT 2880-2882 do not have AMT func-
tion.
VLT
®
2800 Series
28 MG.27.A2.22 - VLT
®
is a registered Danfoss trademark

Danfoss VLT 2800 Series Specifications

General

Brand	Danfoss
Model	VLT 2800 Series
Category	DC Drives
Language	English