VLT
®
6000 HVAC Series
activated. Please note Fire Mode must be enabled
in parameter 430 for terminal 16 or 17 to activate
the Fire Mode. The frequency converter will run at
the in parameter 431 selected speed.
Only by setting input 16 or 17 high or opening
terminal 27 deactivates fire mode again.
Enable RTC is used to start the real time clock
function. When enabled the real time clock functions
will be executed based on time. See description
of RTC for further information.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.61.A5.02 - VLT is a registered Danfoss trademark
104
To Next Page
Loading...
Need help?
General
