Danfoss VLT 6000 series - Page 120

VLT
®
6000 HVAC Series
mbar
[15]
bar
[16]
Pa
[17]
kPa
[18]
mVS
[19]
kW
[20]
°C
[21]
GPM
[22]
gal/s
[23]
gal/min
[24]
gal/h
[25]
Ib/s
[26]
lb/min
[27]
lb/h
[28]
CFM
[29]
ft
3
/s
[30]
ft
3
/min
[31]
ft
3
/h
[32]
ft/s
[33]
in wg
[34]
ft wg
[35]
PSI
[36]
lb/in
2
[37]
HP
[38]
°F
[39]
Function:
Selection of unit to be shown on the display.
This unit will be used if Reference [unit] [2] or Feedback
[unit] [3] has been selected in one of the parameters
007-010, as well as in the Display mode.
In Closed loop, the unit is also used as a unit for
Minimum/ Maximum reference and Minimum/Maximum
feedback,aswellasSetpoint 1 and Setpoint 2.
Description of choice:
Select the required unit for the reference/feed-
back signal.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.61.A5.02 - VLT is a registered Danfoss trademark
120