VLT
®
6000 HVAC Series
Installation
■ Installation of VLT 6402-6602 380-460 V and VLT
6502-6652, 525-600 V Compact IP 21 and IP 54
Cooling Side-by-side
All units in the above-mentioned series require a
minimum space of 225 mm above the enclosure and
must be installed on a flat level surface. This applies
to both IP 21 and IP 54 units.
Gaining access requires a minimum space of 579
mm in front of the frequency converter.
All IP 21 and IP 54 units in the above-mentioned
series can be installed side by side without any space
between them, since these units do not require
cooling on the sides.
MG.61.A5.02 - VLT is a registered Danfoss trademark
47
To Next Page
Loading...
Need help?
General
