Danfoss VLT CANopen MCA 105 Programming Guide

Option
Name
Description
Selects the absolute position mode instead of the relative position mode.
[126]
Activate touch
N O T I C E
This option is available only with software version 48.20 and newer.
Activates the touch probe positioning mode.
[127]
Deactivate touch
N O T I C E
This option is available only with software version 48.20 and newer.
Deactivates the touch probe positioning mode.
[128]
Target inverse
N O T I C E
This option is available only with software version 48.20 and newer.
Changes the sign of the active target position value.
[129]
Target
N O T I C E
This option is available only with software version 48.20 and newer.
The active target position is not changed.
[130]
Act. speed mode
N O T I C E
This option is available only with software version 48.20 and newer.
Activates the speed mode when option [9] Positioning or option [10] Synchronization is selected
in parameter 1-00 Configuration Mode.
[131]
Deact. speed mode
N O T I C E
This option is available only with software version 48.20 and newer.
Deactivates the speed mode and activates the option selected in parameter 1-00 Configuration
Mode.
Parameter 13-57 SL Controller 4 Event
Table 692: Parameter 13-57 SL Controller 4 Event
13-57 SL Controller 4 Event
Default value: Size related
Parameter type: Option, Array [20]
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
AU275636650261en-000101 / 130R0334 | 437Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT CANopen MCA 105 Specifications

General

Brand	Danfoss
Model	VLT CANopen MCA 105
Category	DC Drives
Language	English