Danfoss VLT CANopen MCA 105 Programming Guide

Parameter 18-44 Analog Input X49/9
Table 997: Parameter 18-44 Analog Input X49/9
18-44 Analog Input X49/9
Default value: 0
Parameter type: Range, 0 - 30
Setup: All setups
Conversion index: -3
Data type: Int16
Change during operation: False
Shows the actual value at output of terminal X49/9 in V or mA. The value reflects the selection in parameter 36-50 Terminal X49/9
Analog Output.
Parameter 18-45 Analog Input X49/11
Table 998: Parameter 18-45 Analog Input X49/11
18-45 Analog Input X49/11
Default value: 0
Parameter type: Range, 0 - 30
Setup: All setups
Conversion index: -3
Data type: Int16
Change during operation: False
Shows the actual value at output of terminal X49/11 in V or mA. The value reflects the selection in parameter 36-60 Terminal X49/11
Analog Output.
Parameter 18-46 X49 Digital Output [bin]
Table 999: Parameter 18-46 X49 Digital Output [bin]
18-46 X49 Digital Output [bin]
Default value: 0
Parameter type: Range, 0 - 15
Setup: All setups
Conversion index: 0
Data type: Int16
Change during operation: False
Shows the binary value of all programmable I/O digital outputs.
5.18.7 18-5* Active Alarms/Warnings
The parameters in this group show the numbers of currently active alarms or warnings.
Parameter 18-55 Active Alarm Numbers
Table 1000: Parameter 18-55 Active Alarm Numbers
18-55 Active Alarm Numbers
Default value: 0
Parameter type: Range, 0 - 65535, Array [20]
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
This parameter contains an array of up to 20 alarms that are currently active. The value 0 means no alarm.
Parameter 18-56 Active Warning Numbers
Table 1001: Parameter 18-56 Active Warning Numbers
18-56 Active Warning Numbers
Default value: 0
Parameter type: Range, 0 - 65535, Array [20]
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: True
This parameter contains an array of up to 20 warnings that are currently active. The value 0 means no warning.
AU275636650261en-000101 / 130R0334 | 545Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT CANopen MCA 105 Specifications

General

Brand	Danfoss
Model	VLT CANopen MCA 105
Category	DC Drives
Language	English