FC 300 Design Guide
How to Program
1-93 Thermistor Source
Option:
*
None [0]
Analog input 53 [1]
Analog input 54 [2]
Function:
Selects the analog input used for connecting
the Thermistor (PTC sensor). Do not attempt
to change par. 1-93 while the motor is running.
An analog input cannot be selected if the analog
input is already in use as a reference resource
(selected in par. 3-15, 3-16 or 3-17).
*
default setting ()display text []value for use in communication via serial communication port
150
MG.33.B
3.22 - VLT is a registered Danfoss trademark
To Next Page
Loading...
Need help?
General