Danfoss VLT HVAC Drive FC 102 Design Guide

FC 300 Design Guide
How to Read this Design Guide
" How to Read this Design Guide
This Design Gui de will introduce all asp ects of the FC 30
0.
Chapter 1 , How to Read this Design
Guide, introduces the design guide provides
information about the approvals, symbols,
and
abbreviations used in this manual.
Page divider for How to Read this Design Guide.
Chapter 2, Introduction to FC 300, information
about available fea
tures and instructions on how
to handle the FC 300 correctly.
Page divider for Introduction to FC 300.
Chapter 3, How to Select Your VLT, how to select
the right FC 300 model for the application.
Page divider for How to S elect Your VLT.
5
MG.33.B3.22 - VLT is a registered Danfoss trademark

Danfoss VLT HVAC Drive FC 102 Specifications

General

Enclosure	IP20, IP21, IP55
Ambient Temperature Range	-10°C to +40°C
Storage Temperature Range	-25°C to +70°C
Relative Humidity	5-95% (non-condensing)
Communication Protocols	Modbus RTU, BACnet, Profibus
Certifications	CE, UL, cUL
Control Principle	PWM
Cooling Method	Forced air cooling
Input Voltage	200-240V, 380-480V, 525-600V
Control Modes	sensorless vector control, closed loop vector control