Danfoss VLT MCD 201

•
•
6 Scanner Configuration
6.1 EDS File
An EDS file is available from the website. The EDS file contains all required attributes of the EtherNet/IP module.
For 175G9906, use EDS file SSEM10xxxx.eds.
For 175G9907, use EDS file SSEM11xxxx.eds.
Once the EDS file has been loaded, the individual EtherNet/IP module must be defined.
6.2 Assembly Objects
Table 2: Supported Assembly Objects
Description
Class
Instance
Type
Maximum size
Output (Originator⇒Target)
04d (0x04)
104d (0x68)
Integer
2 (4 bytes)
Input (Target⇒Originator)
04d (0x04)
154d (0x9A)
Integer
6 (12 bytes)
AN427641276310en-000101 / 175R118720 | Danfoss A/S © 2022.10
Scanner Configuration
EtherNet/IP Module
Installation Guide