Contents
1 Quick Guide
2
1.1 Safety
2
1.1.1 Safety Instructions 3
1.2 Introduction
3
1.2.1 Available Literature 3
1.2.2 IT Line Power 3
1.2.3 Avoid Unintended Start 4
1.3 Installation
4
1.3.2 Side-by-Side Installation 4
1.3.3 Mechanical Dimensions 5
1.3.4 Connecting to Line Power and Motor 7
1.3.5 Control Terminals 7
1.3.6 Power Circuit - Overview 8
1.3.7 Load Sharing/Brake 9
1.4 Programming
9
1.4.1 Programming on Automatic Motor Adaptation (AMA) 9
1.4.2 Programming on Automatic Motor Tuning (AMT) 10
1.5 Parameter Overview
11
1.6 Troubleshooting
15
1.6.1 Warnings and Alarms 15
1.7 Specifications
16
1.8 General Technical Data
18
1.9 Special Conditions
21
1.9.1 Derating for Ambient Temperature 21
1.9.2 Derating for Low Air Pressure 21
1.9.3 Derating for Running at Low Speeds 21
1.10 Options
22
Index
23
Contents Quick Guide
MG02B922 Danfoss A/S © Rev. 2014-02-27 All rights reserved.
To Next Page
Loading...
