ㆍPlace the remote control within 10cm of the projector.
ㆍFor first-time use, follow the on-screen projector instructions:
Simultaneously press and hold the [Volume Down] and [Right] buttons until the indicator light begins to flash.
(This means that the remote control is entering pairing mode.)
ㆍThe connection is successful when the indicator light stops flashing.
3.Remote Control Pairing
10 cm
Indicator light
Press and hold for pairing *
* If the pairing is unsuccessful, repeat the above steps until
the remote control indicator light stops flashing.
08
To Next Page
Loading...
