4 | DANGEROUS MUSIC
5. SPEAKER 1 & 2 OUTPUTS
[rear panel speaker outputs pictured above]
Feature: Two stereo outputs for connecting two sets of reference monitors.
Benefit: Compare and contrast your mixes on two sets of speakers using XLR and/or TRS connectors.
Tip: , Use one output for speakers and the other output for a sub: turn the sub on or off whenever you need it. (Also, always
hear the speakers in full range- some subs have a non bypassable crossover.)
6. SELECTED LINE OUTPUTS
[rear panel selected line outputs pictured above]
Feature: A pair of stereo outputs that mirror the speaker source selected.
Benefit: Send your selected source or sources to another destination (i.e. Front of House PA system, mixdown device like a
CD Burner, iPhone or cassette deck- remember those?)
Note: These outputs are unaffected by the speaker level knob.
7. POWER ADAPTOR
[rear panel power supply connection pictured above]
Feature: Power supply is 12 volts, 2 Amps (part number PSU-SRC) and plug into either receptacle.
Benefit: The other is for possible future accessories that could run off the main power supply (shhh).
To Next Page
Loading...