P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PAGE 17
MINUTE MINDER
• Press the Minute control key (1) and set the required time by means of the +/- keys (4+5).
• While the set time runs, the bell symbol will appear.
• When the set time elapses, the buzzer will sound.
BUZZER
• The buzzer remains active for 7 minutes after the minute control cycle or the cooking
program has finished.
• Press any function key to stop the buzzer.
PROGRAM START-UP AND CHECK
• A set program is run when the required time has also been set. The remaining timers can be
checked at any time by selecting the relevant function.
SETTING ERROR
• The setting is not correct if the clock time is between the beginning of the cooking time and
the end of the cooking time.
• The error is indicated via sounding of a buzzer and blinking of the Auto symbol.
• An incorrect setting can be corrected by re-setting either the beginning
or end of cooking time.
CANCELLING A PROGRAM
• A program can be cancelled by selecting the manual function.
• A set program is automatically cancelled when it reaches the end of its cycle.
THE OVEN LIGHT
• Set knob “B” to the symbol to turn it on.
• It lights the oven and stays on when any of the electrical heating elements in the oven come on.
COOLING VENTILATION
In order to cool down the exterior of the appliance, this model is equipped with a cooling fan,
which comes on automatically when the oven is hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the
control panel.
Note: When cooking is done, the fan stays on until the oven cools down suciently.
To Next Page
Loading...
