P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PAGE 20
NOTICE!!
THE INNER GLASS IS NOT REMOVABLE
Replacing the Lamp in the Oven
• Unplug your oven!
• Wear rubber gloves when replacing the bulb
• Disconnect the oven from the power supply by means of
the omni polar switch used to connect the appliance to
the electrical mains; or unplug the appliance if the
plug is accessible.
• Unscrew the glass cover attached to the lamp holder;
following characteristics:
- Voltage: AC220V-240V
- Wattage: 15W
- Socket: E 14
• Remount the glass cover and reconnect the
appliance to the power supply.
WARNING!!
Ensure that the appliance is unplugged before replacing the lamp to avoid the possibility of
electric shock.
To Next Page
Loading...
