Need help?Do you have a question about the Dantherm CDP 35 and is the answer not in the manual?
General| Brand | Dantherm |
|---|---|
| Model | CDP 35 |
| Category | Dehumidifier |
| Language | English |
Read the entire manual before the initial start-up of the unit.
The CDP 35/45/65 works on the condensation principle with air circulation.
Fan and compressor activation is linked to the hygrostat; compressor has a 6-minute start timer.
The compressor stops automatically if the unit temperature exceeds 55 °C to prevent damage.
The dehumidifier uses a built-in hygrostat set to approximately 60% RH.
Procedure for correct mounting of the CDP 35/45/65.
Details on the condensate outlet connection, including hose requirements and pump options.
Procedure for monthly cleaning of the air inlet filter and drip tray.
Procedure for annual inspection and cleaning of the dehumidifier's interior and components.
If the dehumidifier is not functioning correctly, shut it down immediately!
Table to localize and solve possible problems with the dehumidifier's operation.
Specifications and data for CDP 35, CDP 45, and CDP 65 models.
Explanation of terms and symbols used in the electrical diagrams.
List of spare parts for CDP 65, including part numbers and descriptions.
To Next Page
