Need help?Do you have a question about the Dantherm CDP 45 and is the answer not in the manual?
General| Brand | Dantherm |
|---|---|
| Model | CDP 45 |
| Category | Dehumidifier |
| Language | English |
Operator must read and understand this service manual and safety precautions.
Explains the condensation principle operation of the CDP 35/45/65.
Explains compressor start limitations and safety functions.
Describes the process of evaporator icing and passive defrosting.
Explains safety mechanisms that stop the compressor due to high temperature.
The unit is controlled by a built-in hygrostat set to approx. 60% RH.
Procedure to connect an external hygrostat (12 V outlet).
Procedure to mount the CDP 35/45/65 unit, including wall suspension.
Location and connection of the condensate outlet, requiring a fall of at least 2%.
Power connection according to nameplate and local regulations.
Procedure for monthly service: cleaning the air inlet filter and drip tray.
Procedure for annual inspection: cleaning the inside and condenser.
If the dehumidifier is not functioning correctly, shut it down immediately!
Table to localize and solve possible problems with the dehumidifier.
Dantherm A/S offers preventive maintenance to ensure operation according to factory standards.
Dantherm A/S offers emergency repair services with agreements on response time and price.
To Next Page
