Dantherm CDP 45 User Manual

18
General information
Introduction
This topic gives the general information about this service manual and about the unit.
Manual, part no.
Part number of this service manual is 975675.
Target group
The target group for this service manual are the technicians who install and maintain
the CDP 35/45/65 unit.
Copyright
Copying of this service manual, or part of it, is forbidden without prior written permis-
sion from Dantherm.
Reservations
Dantherm reserves the right to make changes and improvements to the product and the
service manual at any time without prior notice or obligation.
EC-Declaration of
Conformity
Dantherm A/S, Marienlystvej 65, DK-7800 Skive hereby declare that the units men-
tioned below:
Dehumidifiers, type CDP 35/45/65:
are in conformity with the following directives:
98/37/EEC Directive on the safety of machines
73/23/EEC Lov Voltage Directive
89/336/EEC EMC Directive
- and are manufactured in conformity with the following standards:
EN 60335-2-40 Standard for electric dehumidifiers
EN 292 Machine Safety
EN 50081-1-EMC Generic Standard for Emission
EN 50082-1 EMC Generic Standard for Immunity
Skive, 16.08.2001
Recycling
The unit is designed to last for many years. When the time comes for the unit to be re-
cycled, it should be recycled according to national rules and procedures to protect the
environment.
The CDT dehumidifiers contain R407C refrigerant and compressor oil. The compressor
must in connection with disposal be returned to authorities.

Dantherm CDP 45 Specifications

General

Brand	Dantherm
Model	CDP 45
Category	Dehumidifier
Language	English