Dantherm CDP 45 User Manual

24
Mounting and installation instructions, continued
Condensate outlet
The condensate outlet is located at the base of the dehumidifier. The unit has a drain
spigot intended for connection of a ½’’ flexible or fixed water hose. If you choose to
have the outlet through the wall, a matching hole is made in the wall and the drain pipe
is connected to the dehumidifier before it is placed on the wall suspension bar.
It is important that the hose from the dehumidifier to the drainage has a fall of at least
2 % to make sure that the water runs away from the condensate tray.
As an alternative a condensate pump can be fitted at the water outlet to pump the water
to a drain.
The position of the condensate outlet is shown on the drawing – the unit is seen from
above.
Illustration
Position of the drain:
Connection of
power supply
Power is connected to the unit in accordance with the nameplate. Please see wiring dia-
grams on pages 97-99.
Important! All electrical connections must be made in accordance with local power sup-
ply company regulations!
Water quality
Instructions from the supplier of the water treatment plant must always be respected.
With the addition of
chemicals
The following guidance values are applicable to swimming pools with the addition of
chemicals
Chemicals
ppm
Free chlorine content
1,0-2,0
Combined chlorine content
Max. 1/3 of free chlorine content
pH
7,2-7,6
Total alkalinity
80-150
Calcium hardness
250-450
Total dissolved solids
< 2000
Sulphates
< 360
Continued overleaf

Dantherm CDP 45 Specifications

General

Brand	Dantherm
Model	CDP 45
Category	Dehumidifier
Language	English