Dantherm CDP 50 - Wall Duct for CDP-T; Wall Duct Dimensions; Wall Duct Adaptor Installation

38
EN
Wall duct for CDP-T
Dimensions
For use if you have
previously cut holes in your wall
and want to install a new gene-
ration CDP-T dehumidier.
1. Fit rubber seal along the
edges of the adaptor.
( Dotted lines on this
illustration.)
2. Mount the adaptor on the
wall covering existing holes.
3. Hang the CDP-T
dehumidier on the bracket
mounted on the adaptor.
Wall duct adaptor CDP-T