Dantherm CDP 50 - Installer Menu Settings; Setting Fan Speed; Setting Service Interval

43
EN
Fan set point.
When the extractor fan icon ashes at 0.5 Hz and extractor fan set point value is shown on info line.
Left or right button to decrease or inrease value. Enter to conrm set point and go to next icon.
If you do not conrm change, the new setpoint will not be stored
Service interval
While ashing, the service interval can be increased by pressing RIGHT Button or decreased by
pressing the LEFT Button.
Maximum 99 Weeks. Minimum is 1 week.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press to conrm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press to conrm.
Installer menu
Press and hold for 5 seconds to enter installer menu.