Dantherm CDP 50 - User Menu Settings; Setting Humidity and Temperature; Setting Dehumidifying Set Point; Setting Temperature Set Point

42
EN
Dehumidifying set point
The humidity value and the dehumidifying icon will ash.
The display shows the desired humidity set point.
While ashing, the value can be increased or decreased by pressing Up/Increase or
Down/Decrease button on DRC1.
Press enter to conrm humidity set point and go to next menu page.
Temperature set point
The temperature value and the heating icon will ash.
The value displayed shows the desired temperature set point. While ashing, the value can be
increased or decreased by pressing Up/Increase or Down/Decrease button on the DRC1
Maximum: 34 °C, Minimum: 5 °C. Press enter to conrm new set point and go to next menu page.
User menu
Set points
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press for 3 sec to enter
user menu setup.
Press to conrm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press for 3 sec to enter
user menu setup.
Press to conrm.