Dantherm CDP 50 - DRC1 Operation Information; DRC1 Operation Symbols; DRC1 Fail Condition Display; DRC1 Locked Remote Function

41
EN
Operation
When the dehumidier is running the dehumidifying symbol ( ) is shown in the DRC1 display.
When heating is toggled ON, the heating icon ( )will be shown in the DRC1 display.
When the extractor fan is turned on, the extractor fan icon ( ) will be shown in the DRC1 display.
Fail Condition
If the dehumidier enters fail mode, the warning sign ( ) will be shown in the DRC1 display.
Locked remote
The DRC1 is equipped with switch in the battery compartment.
When switched to ”lock” position, the buttons on the DRC1 become inactive.
The display will still update with information, but does not allow user inputs.
Press and hold for 10
seconds to reset the serial
number stored in DRC1.
Press and hold for 5
seconds to enter
installer menu.
Press and Hold for 3
seconds to enter
user menu setup.
General information