Danze FP4A0092 - User Manual

Safety Tips
• When installing flexible hose, there should be no torsion or deformation; DO NOT fold into V or L
shape; DO NOT use if there are any cracks or deformations.
• The fittings should be installed by a licensed plumber.
• Cover your drain to avoid losing parts.
Conseils de sécurité
• Lorsque vous installez le tuyau flexible, il ne doit exister aucune torsion ou déformation;
NE le pliez PAS en V ou L; NE L’UTILISEZ PAS s’il existe des fissures ou déformations.
• Les raccords doivent être installés par un plombier accrédité.
• Recouvrez le drain pour éviter de perdre des pièces.
Consejos de seguridad
• Al instalar la manguera flexible, esta no debe doblarse o torcerse; NO doblar en forma de V o L;
NO usar si está agrietada o deformada.
• Estos acoplamientos deben ser instalados por un plomero con licencia.
• Cubre el drenaje para evitar que se pierdan piezas.
1
FP4A0092
Pull-Down Kitchen Faucet
Robinet de cuisine à bec rétractable
Grifo abatible para cocina
Need Help? Please call our toll-free Technical Support line at 1-800-487-8372 for additional assistance or service./
Besoin d’aide? Veuillez communiquer avec notre ligne de soutien technique sans frais à 1-800-487-8372 pour obtenir du service
ou de l’aide additionnels./¿Necesitas Ayuda? Favor de llamar a nuestro servicio de soporte técnico sin costo al 1-800-487-8372
para asistencia adicional o servicio.
Tools needed (not included):
Outils requis (non incluse):
Herramientas necesarias (no se incluye):
Adjustable wrench
Clé réglable
Llave ajustable
Safety goggles
Lunettes protectrices
Gafas de seguridad
Silicone sealant
Enduit d’etancheite au silicone
Sellador de silicona

Summary

Safety Tips

General Safety Advice

Advice on installing flexible hose, using a licensed plumber, and covering the drain.

Need Help?

Technical Support Contact

Contact the toll-free technical support line for assistance or service.

Important Information

Installation Precautions

Turn off water, hand-tighten connectors, inspect hoses for twisting or deformation.

Includes;Comprend;Incluye

Parts Identification

Identifies faucet body, spray head, base, deck plate, and other included components.

Faucet Installation

Initial Setup and Base Installation

Turn off water, check sink thickness, and install the base with or without deck plate.

Hose and Supply Line Routing

Insert spray hose and supply lines through the base of the faucet.

Faucet Body Attachment

Align and attach the faucet body to the base, securing it with the hex wrench.

Connector and Weight Installation

Attach quick connector to hoses and install the weight on the spray hose.

Final Checks and Flushing

Remove spray head, turn on water to flush, check for leaks, and replace spray head.

Quick Connector Removal

Instructions on how to disconnect the quick connector from the hose.

Parts Diagram

Maintenance

Troubleshooting

Danze FP4A0092 Specifications

General

Brand	Danze
Model	FP4A0092
Category	Plumbing Product
Language	English