Danze FP4A0006 User Manual

Tools needed (not included):
Outils requis (non incluse):
Herramientas necesarias (no se incluye):
Adjustable wrench
Clé réglable
Llave ajustable
Safety goggles
Lunettes protectrices
Gafas de seguridad
Silicone sealant
Enduit d’etancheite au silicone
Sellador de silicona
1
FP4A0006
Pull-Down Kitchen Faucet
Robinet de cuisine à bec rétractable
Grifo abatible para cocina
Need Help? Please call our toll-free Technical Support line at 1-800-487-8372 for additional assistance or service./
Besoin d’aide? Veuillez communiquer avec notre ligne de soutien technique sans frais à 1-800-487-8372 pour obtenir du service
ou de l’aide additionnels./¿Necesitas Ayuda? Favor de llamar a nuestro servicio de soporte técnico sin costo al 1-800-487-8372
para asistencia adicional o servicio.
Safety Tips
• When installing flexible hose, there should be no torsion or deformation; DO NOT fold into V or L
shape; DO NOT use if there are any cracks or deformations.
• The fittings should be installed by a licensed plumber.
• Cover your drain to avoid losing parts.
Conseils de sécurité
• Lorsque vous installez le tuyau flexible, il ne doit exister aucune torsion ou déformation;
NE le pliez PAS en V ou L; NE L’UTILISEZ PAS s’il existe des fissures ou déformations.
• Les raccords doivent être installés par un plombier accrédité.
• Recouvrez le drain pour éviter de perdre des pièces.
Consejos de seguridad
• Al instalar la manguera flexible, esta no debe doblarse o torcerse; NO doblar en forma de V o L;
NO usar si está agrietada o deformada.
• Estos acoplamientos deben ser instalados por un plomero con licencia.
• Cubre el drenaje para evitar que se pierdan piezas.

Danze FP4A0006 Specifications

General

Brand	Danze
Model	FP4A0006
Finish	Chrome
Flow Rate	1.2 GPM
Valve Type	Ceramic Disc
WaterSense Certified	Yes
ADA Compliant	Yes
Warranty	Limited Lifetime
Handle Style	Lever
Product Type	Faucet
Installation Type	Deck Mount
Handle Type	Lever
Spout Reach	5.5 inches

Summary

Introduction and Preparation

Tools Needed

Lists tools required for faucet installation that are not included.

Safety Tips

Crucial advice on flexible hose installation and plumber requirements.

Important Information

Key pre-installation instructions and warnings about water supply lines.

Parts Included

Lists and illustrates all components included with the faucet.

Faucet Installation Steps

Initial Setup and Sink Check

Instructions for turning off water, removing old faucet, and checking sink thickness.

Deck Plate Installation Options

Guides for attaching the faucet base with or without a deck plate.

Securing Faucet Base

Instructions for tightening screws to secure the faucet base and removing the base insert.

Connecting Spray Hose

Steps for preparing and inserting the spray hose into the faucet base.

Connecting Supply Lines and Mixing Tube

Guide for inserting water supply lines and the mixing tube into the faucet base.

Attaching and Securing Faucet Body

Instructions for aligning and securing the main faucet body to the base.

Connecting Quick Connector

Steps for connecting the quick connector to the spray hose and discharge tube.

Tightening Water Supply Lines

Final connection and tightening of water supply line nuts using wrenches.

Weight Attachment and Flushing Prep

Instructions for attaching the weight and removing the spray head for flushing.

Flushing and Leak Check

Steps for turning on water, flushing the faucet, and checking for leaks.

Final Assembly and Removal

Replacing the spray head and instructions for quick connector removal.

Parts Diagram

Maintenance and Troubleshooting

Maintenance Guidelines

Guidelines for cleaning and maintaining the faucet to ensure longevity.

Troubleshooting Common Issues

Common problems and their solutions for faucet issues.