Danze FP4A0096 User Manual

1
Silicone sealant
Enduit d’etancheite au silicone
Sellador de silicona
FP4A0096
Kitchen Faucet
Robinet de cuisine
Grifo de la cocina
Tools needed (not included):
Outils requis (non incluse):
Herramientas necesarias (no se incluye):
Adjustable wrench
Clé réglable
Llave ajustable
Safety goggles
Lunettes protectrices
Gafas de seguridad
Safety Tips
When installing flexible hose, there should be no torsion or deformation; DO NOT fold into V or L
shape; DO NOT use if there are any cracks or deformations.
Cover your drain to avoid losing parts.
• The fittings should be installed by a licensed plumber.
Conseils de sécurité
Lorsque vous installez le tuyau flexible, il ne doit exister aucune torsion ou déformation;
NE le pliez PAS en V ou L; NE L’UTILISEZ PAS s’il existe des fissures ou déformations.
Recouvrez le drain pour éviter de perdre des pièces.
• Les raccords doivent être installés par un plombier accrédité.
Consejos de seguridad
Al instalar la manguera flexible, esta no debe doblarse o torcerse; NO doblar en forma de V o L;
NO usar si está agrietada o deformada.
Cubre el drenaje para evitar que se pierdan piezas.
• Estos acoplamientos deben ser instalados por un plomero con licencia.
Need Help? Please call our toll-free Technical Support line at 1-800-487-8372 for additional assistance or service./
Besoin d’aide? Veuillez communiquer avec notre ligne de soutien technique sans frais à 1-800-487-8372 pour obtenir du service
ou de l’aide additionnels./¿Necesitas Ayuda? Favor de llamar a nuestro servicio de soporte técnico sin costo al 1-800-487-8372
para asistencia adicional o servicio.

Danze FP4A0096 Specifications

General

Brand	Danze
Model Number	FP4A0096
Product Type	Bathroom Faucet
Material	Brass
Finish	Chrome
Flow Rate	1.2 GPM
Installation Type	Widespread
Handle Style	Lever
Valve Type	Ceramic Disc
Mounting Type	Single Hole
Spout Height	5.5 inches
Handle Type	Single Handle
ADA Compliant	Yes
Spout Reach	5.5 inches

Summary

Safety Tips

Safety Installation Guidelines

Guidelines for safe installation and use of the faucet, including hose handling and professional installation advice.

Important Information

Pre-Installation Steps

Crucial details before installation, covering water pressure release and proper hose connection to prevent damage.

Included Components

Installation Options

1-Hole Sink Installation

Instructions for installing the faucet on a sink with a single mounting hole.

3-Hole Sink Installation

Instructions for installing the faucet on a sink with three mounting holes, using a cover plate.

Faucet Installation Preparation

Prepare Sink and Water Supply

Turn off water supply, remove old faucet, and check sink thickness for proper fit.

Faucet Installation: Mounting Fixture

Mounting Without Deck Plate

Steps to secure the top mounting fixture into the sink without using a decorative deck plate.

Mounting With Deck Plate

Steps to install the mounting fixture with a deck plate, using silicone sealant for a secure fit.

Faucet Installation: Securing and Connecting

Orient and Secure Mounting Fixture

Ensure the 'FRINT' label faces forward, then secure the mounting fixture with the hex wrench.

Connect Water Supply Lines

Insert water supply lines through the large hole of the mounting fixture.

Attach Faucet Body

Align arrows, attach the faucet body to the mounting fixture, and tighten the set screw.

Faucet Installation: Final Steps

Connect Water Supply Valves

Identify and connect hot/cold water supply valves using adjustable wrenches, avoiding twisting.

Flush Faucet and Check Leaks

Remove spray head, turn on water to flush, and check for any leaks from connections.

Replace Spray Head

Reattach the spray head after flushing the faucet.

Parts Diagram and Identification

Maintenance and Cleaning

Troubleshooting Common Issues