Controls
Blend: Mixes the clean and processed signals. The clean
signal remains at unity gain while the volume of the
overdriven signal is set by the Level knob, allowing for fine mix
tuning.
Level: Sets the volume of the overdriven signal.
Drive: Sets the amount of gain in the overdriven signal.
Mod: Selects or mixes between the two distinct distortion
circuits: Alpha is punchy, tight with a lot of definition, whereas
Omega is simply brutal and raw.
Bite Switch: Boosts High Mids (2.8kHz) for additional
presence and definition.
Growl Switch: Shelving Bass Boost for a fatter tone and
increased low end saturation.
Technical Specifications
Input Impedance 1M
Output Impedance 1k
Current Consumption ~11mA
Voltage 9V DC (Center Negative)
Dimensions
Width 75 mm (2.95 in)
Height 111 mm (4.37 in)
Depth 45 mm (1,77 in)
To Next Page
Loading...
