Need help?Do you have a question about the Darkglass Electronics Microtubes X Ultra and is the answer not in the manual?
General| Input Impedance | 1 MΩ |
|---|---|
| Headphone Output | Yes |
| Current Draw | 300mA |
| Type | Bass Preamp |
| EQ | 4-Band EQ |
| Drive Channels | 2 |
| Cabinet Simulation | Yes |
| DI Output | Yes |
| MIDI Compatibility | Yes |
| USB | Yes |
| Power Supply | 9V DC (center negative) |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 1 x 1/4" Output, 1 x XLR DI Output, 1 x 1/4" Headphone Output |
Explains the Microtubes X Ultra's core multiband distortion capabilities and its flexibility for bassists.
Crucial warning about current draw, power adapter requirements, and avoiding batteries or unregulated power for safety.
Details how to activate the warranty and provides contact information for support inquiries.
Details High Pass Frequency, High Drive, High Level, Low Pass Frequency, Low Comp, and Low Level knobs.
Explains the Master, Low shelf, Frequency, and High shelf sliders for tone shaping and overall output.
Guides on enabling clean signal compression via Darkglass Suite and pedal interaction.
Describes the balanced XLR output, its ground lift feature, and cabinet simulation toggle.
Details the 3.5mm headphone jack, its volume control, and the Micro USB port for PC/Mac connection.
Lists key performance metrics like impulse length, latency, dynamic range, and internal processing.
Covers input/output impedance, current, voltage, dimensions, and weight.
Instructions for using the Darkglass Suite for pedal configuration, IR loading, and firmware updates.
Information on EMC/EMI compliance, FCC rules, and potential interference mitigation steps.
To Next Page
