Need help?Do you have a question about the Darkglass Electronics Microtubes B3K and is the answer not in the manual?
The Microtubes B3K has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug.
To activate the warranty, register your product at mypedal.darkglass.com and enter the serial number on the back of your pedal.
Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob.
Sets the volume of the overdriven signal.
Sets the amount of saturation in the overdriven signal.
Sets the amount of low frequency content to saturate by selecting between three different bass boost levels.
Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence.
General| Brand | Darkglass Electronics |
|---|---|
| Model | Microtubes B3K |
| Category | Music Pedal |
| Language | English |
To Next Page
