Technical Specifications
Single user loadable cabinet simulation impulse response
· Maximum impulse length 21 ms
· 48 kHz, 16-bit internal processing
· 1.6 ms latency
· 92 dB dynamic range
Micro-USB B port to connect to PC/Mac
3.5mm headphone output with cabinet simulation:
· 16 Ohm minimum load.
· 50 mW output power at 16 Ohms.
· 30 mW output power at 32 Ohms.
Balanced XLR output with switchable cabinet simulation and
switchable ground lift.
Input Impedance 1M
Output Impedance 1k
Current Consumption ~ 200 mA
Voltage 9V DC (Center Negative)
Dimensions
Width 125 mm (4.92 in)
Height 96 mm (3.77 in)
Depth 57 mm (2.24 in)
Weight 430 gr (0.94 lb)
To Next Page
Loading...
