DAS Vantec Series - VANTEC-12 A (Wireless Audio)

8 Vantec series User's Manual
VANTEC-12A
The VANTEC-12A is a powered loudspeaker (2 channel Class D amplifier), that utilizes a 12” low frequency transducer and
a 1” exit compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an environmentally
friendly black paint finish. Two bar handles and a steel grille are provided. A 35mm tripod socket allows for stand mounting
with two possible angles 0º or -10º.
• Two-way powered system.
• 12” bass loudspeaker.
• Compression driver with titanium diaphragm.
• Symmetric enclosure design for stage monitor use.
• Built-in rigging points (eyebolt based).
• Stand mountable / Dual angle.
VANTEC-15A
The VANTEC-15A is a powered loudspeaker (2 channel Class D amplifier), that utilizes a 15” low frequency transducer and
a 1” exit compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an environmentally
friendly black paint finish. Two bar handles and a steel grille are provided. A 35mm tripod socket allows for stand mounting
with two possible angles 0º or -10º.
• Two-way powered system.
• 15” bass loudspeaker.
• Compression driver with titanium diaphragm.
• Symmetric enclosure design for stage monitor use.
• Built-in rigging points (eyebolt based).
• Stand mountable.
Vantec Series | Introduction