Dascom DC-7600 Assembly Instructions

Assembling the Hardware to make the DC-7600 Lamination Station
After receiving the DC-7600 Lamination station, some assembly is required. This Instructions set will help in
providing the steps to assembly the station quickly.
You will need a
1) Magnetic #1 Phillips screwdriver to assembly the hardware that makes up the station.
First, take inventory of the parts you received.
Laminator Stand
DC-5100
Laminator
Laminator Power
Brick assembly
USB
Cable
Laminator to Printer
Communication Cable
DC-7600
Card Printer
Station
Mounting Plate
Laminator Fastening
Hardware and
Laminate RFID Tag
Laminate and
Take-up Spool DC-7600 Card Printer Assesories
Printer
Fastening
Hardware
0.76mm
PVC Cards

Dascom DC-7600 Specifications

General

Type	Dot Matrix Printer
Resolution	Up to 360 x 360 dpi
Print Resolution	360 x 360 dpi
Paper Handling	Tractor feed
Connectivity	Parallel, USB
Emulation	Epson ESC/P
Number of Pins	24
Paper Thickness	0.065 mm to 0.46 mm
Interface	USB 2.0, IEEE-1284 Parallel
Print Technology	Serial Impact Dot Matrix
Print Method	Serial Impact Dot Matrix